Maximator high-pressure pumps can be used for many technical applications in engineering and industry – even in explosion-proof areas. They generate pressure using oil, water or special fluids in a reliable, cost-effective way. The pumps are based on the design principle of an oscillating pressure intensifier, so that pumping continues when the pressure drops. The pumps are driven with compressed air at 1 to 10 bar.
Make: MAXIMATOR
MAXIMATOR PLV series air amplifiers are suitable for the compression of pressurised air or nitrogen. The units are capable of increasing normal pressures of 4 bar or 6 bar to the desired final pressures. The PLV Air Amplifiers are operated with normal shop air and are provided with a variety of amplification ratios. All PLV Air Amplifiers can be supplied with an air control unit comprising a filter, pressure regulator with pressure gauge and an air shut-off valve. The desired operating pressure can be preset by means of the air control unit in correspondence with the different pressure ratios. We can offer you a choice between a standard PLV Air Amplifier Station or a customised solution.
Make: MAXIMATOR
The Maximator high pressure gas boosters are suitable for the oil free compression of gases and air. Industrial gases like argon, helium, nitrogen and hydrogen can be compressed to operating pressures of 2400 bar (36000 psi) and oxygen up to 350 bar (5075 psi), depending on the application.
Air driven gas boosters are an efficient alternative instead of electrically driven products and can be used in explosion-proof areas (according to 2014/34/EU)
Make: MAXIMATOR
PressureJet offers HydroJet Machine for Evaporator Tube Cleaning, Condenser Tube Cleaning, Heat Exchanger Tube Cleaning & various Pipe Cleaning applications. PressureJet offers Tube and Pipe Cleaning Machine ranging from 100 bar to 1400 bar (2000 psi to 20000 psi) pressure.
Make: PRESSUREJET
PressureJet’s Hydroblaster is capable of cleaning/surface preparation applications where pressure of 7,000 to 20,000 PSI (500 bar to 1400 bar) is required. This Pressure range meet the various cleaning requirements of most industrial applications like Ship Hull Cleaning, Paint & Rust Removal, Surface Cleaning, Surface Preparation, Concrete Demolition (Hydro Demolition), Kiln Cleaning in Cement Plant, Tank Cleaning with Special Nozzles and many more industrial applications.
Make: PRESSUREJET
The Industrial High Pressure Cleaner from PressureJet can clean/prepare surfaces at 2,000 to 7,000 PSI (140 bar to 500 bar). This pressure range meets the cleaning needs of most industrial applications such as cleaning after pickling, floor cleaning, surface cleaning, dust removal, paint removal, and many more.
Make: PRESSUREJET
PressureJet offers wide range of high pressure hydro test pumps & equipment ranging from 1 lpm to 445 lpm and pressure up to 1400 bar. Hydraulic pressure test pump is either electric motor driven or engine driven.
Make: PRESSUREJET
The Sewer Jetting Pumps work at a high pressure, between 150 - 300 bar and 12 - 445 lpm. The pressure can be adjusted throughout the job as needed. These Sewer Jetting Pumps use a special nozzle that gets down into the drains to loosen and cuts the clogged materials that are obstructing the pathways.
Make: PRESSUREJET
With field confirmed reliability in applications, PressureJet provides the perpetual and most reliable high pressure triplex plunger pumps and systems for UHP fire fighting equipment.
Make: PRESSUREJET
Tank cleaning is the most essential In the industries. Production of most of chemicals, petrochemicals, breweries and other process industries, the internal surfaces of vessel cleaning and reactor cleaning at internal surface must be cleaned on a regular basis. There is usually a build up of contamination on the reactor walls and on the agitator blade surface, which can be easily cleaned with high pressure tank cleaning equipment. This build up results in inefficiencies and also the risk of down stream contamination due to debris falling off. Likewise cleaning of jackets of vessels is as much as important as cleaning of reactor tank. If a reactor jacket becomes fouled, a plant can face serious consequences. Over a period of time internal fouling of the jackets in tanks & vessels reduces heat transfer efficiencies, increases reaction times and decreases yield by as much as 15%. In addition, this loss of efficiency can lower a plant's profitability due to the production of off-quality product, increased maintenance expense and higher capital costs due to shorter equipment service life.
Make: PRESSUREJET
A layer of scale is produced on the surface of metal during re-heating of metal in furnace. Scale is a layer of oxide develop on the surface of the steel because of high temperatures, up to l250 °C, and the presence of oxygen and different gases.Descaling by High-pressure jet produce mechanical force due to high impact pressure of a razor blade like jet (extremely sharp edge) are consider for the removal of the scale from the surface. Scale is discharged from surface of Billet by different rate of contraction of scale. The released scale is washed away with high-pressure water through angled jet.
Make: PRESSUREJET
HYDRAULIC TEST PUMP - 100 BAR
MAKE: EGAMASTER
The PWRPAX Series Hydraulic Torque Wrench Pumps are built for durability, ensuring high performance even in demanding environments. Both the Electric and Air PWRPAX are three-stage pumps that offer 2-port and 4-port manifolds with heavy-duty roll cages.
PWRPAX-115/220 Features
Runs Up to 4 Hydraulic Torque Wrenches
Three-Stage High-Performance Pump
External Adjustable Pressure Regulator
Heavy Duty Roll Cage
Remote Control Assembly
Cooling System
10,000 PSI / 690 BAR
Hour Meter
Pressure Gauge (analog)
PWRPAX-115/220 Product Details
110 volts or 220 volts @ 50/60 hz
110V 13.7 amps – 220V 6.75 amps
1.5 HP
3450 RPM
Maximum Oil Flow: 610 in³/min, 10.2L/min
Reservoir Capacity: 2 Gal/7.57 L
Overall Dimensions:
• 18″ x 15.50″ x 18.25″
• 45.7 cm x 39.4 cm x 46.4 cm
Weight (without oil): 75 lbs/35 kg
(Available in 4 Port)
Make: TORSIONX
The PWRPAX Series Hydraulic Torque Wrench Pumps are built for durability, ensuring high performance even in demanding environments. Both the Electric and Air PWRPAX are three-stage pumps that offer 2-port and 4-port manifolds with heavy-duty roll cages.
PWRPAX-AIR Features
Runs Up to 4 Hydraulic Torque Wrenches
Three-Stage High-Performance Pump
External Adjustable Pressure Regulator
Heavy Duty Roll Cage
Remote Control Assembly
10,000 PSI / 690 BAR
Pressure Gauge (analog)
PWRPAX-AIR Product Details
4 HP
3000 RPM
Maximum Oil Flow: 625 in³/min, 10.2L/min
Reservoir Capacity: 2 Gal/7.57 L
Overall Dimensions:
• 18″ x 15.50″ x 18.25″
• 45.7 cm x 39.4 cm x 46.4 cm
Weight (without oil): 64 lbs/29 kg
(Available in 4 Port)
Make: TORSIONX
